1 thought on “How to make puppy shoes”

  1. Putting shoes for dogs is not only cute, but also keeps warm, and it is not easy to scratch the soles of the feet.
    Tools/raw materials or skin (not easy to leak water), cloth; puffy; loose band; woolen edge; nylon buckle step/method 1. First use the sole to cut the bottom of the four dog feet sizes: 2. According to the same way The paper type on the picture is cut like this ~ The section of the line is the perimeter of the entire soles. It is best to grow a little bit, and it will look good when you go back. Just cut another layer ~~:
    The combination is like this:
    4, cut 8 short and short banded tight band: 5. Plous cloth is cut according to the picture, the yellow se circle is in the circle of the yellow se circle is the one in the circle of the yellow se circle is the inner circle. Insoles, the blue circle is the tongue Tou (that is, the layer of the pad in the part of the tourist shoe lace). On both sides of the fabric, a small piece of sewing, this is for beauty: 8. Then there are two loose band inside.
    9. Switching the edge of the fabric to the straight line: 10. The bottom and the shoe are sewed together. At this time, add that tongue TOU, because you are worried that the opening will leak in the opening, the dog is uncomfortable to wear the dog is uncomfortable to wear. : 11. After sewing, turn the shoes over. Of course, the leather foundation must be outside. Here you can turn it over:
    The conditions can sew the zipper again. 12. Stall one side of the nylon with the side of the shoe, and the other half of the luo, so that it will stick around in the place of the akle.

Leave a Comment