5 thoughts on “What are the measurements for the ring size?”
Keith
Tools prepare to measure the size of the ring: fine rope (no elasticity), straight ruler, pen, scissors The specific methods are as follows: 1, two laps around the root of the finger, tighten the rope, the fingers are not uncomfortable It is appropriate. 2. Use a pen to marker at the same position of the two -round rope. The mark should not be too thick, so as not to affect the accuracy of the measurement. 3, straighten the rope, measure the length between the two points with a straight ruler, this length corresponds to the length of the ring.
The simple method of measurement of the ring size is as follows: 1, first, prepare a note to cut into a width of about one centimeter. When cutting the note, you must pay attention to the flatness of the edge, which can reduce the error. 2, and then take the cut note around the fingers you want to bring. As shown in the figure below, just coincide with the position of the starting note. Then use your own nails to press a fine mark with your own nails. Then use a pen to make a mark. 3, how many centimeters can be measured by the last ruler. After the measurement of the ring is completed, you can find your own appropriate surrounding according to the universalic meter. The expansion information: Ring size Measurement 1. When measuring the inch, make sure it can smoothly slide over the top of the finger joint; if you feel too loose after bringing the ring, you can wrap around the inner side of the ring. A few circles, red lines, or silk threads. If you are too tight, you can apply skin oil or soapy water on your fingers, so that you can put it on or take off smoothly. 2, buying a ring in winter, because the weather is cold, the fingers are thinner than the summer to the half to the number. If you want to get more accurate size, you can measure it at the end of this day, because the size of the finger is the largest at this time. 3, the size control table is for reference only. If the accuracy of the number cannot be guaranteed, it is recommended to go to the jewelry store to measure your head in order to avoid buying inappropriate rings.
You can measure the perimeter of your fingers, and then go to the size of the ring to find a suitable ring.
The specific measurement method is as follows: 1. A circle of the fingers of the fingers of the ring with a wide note, be careful not to be too loose or too tight. Make a mark at the junction of the note, so that it is convenient to measure the next step, as shown in the figure below: 3, then expand the note, how many centimeters are measured with a ruler. The perimeter: 4. After the measurement is measured, the size of the ring can be found to find the ring that suits you:
Step/Method The width note surrounds the fingers wearing rings This on the intersection of the paper strip. The data is the length of the need to buy the ring based on the weekly check the ring the ring
Note For your own measurement accurate, you can use wide paper at home. Strip the root of the fingers, loosely tightly and the roots of the fingers of the fingers, and then use the pen to marker the intersection of the wide note around the intersection, measure the length of the note with a ruler, and find the corresponding finger circle on the table. Numbers, and adjust your number appropriately according to the seasonal different seasons. Buy the ring in winter. Because the weather is cold, the fingers are thinner than the summer to the half to the half. It is appropriate to feel a little tight after being brought. If with the ring if you feel too loose, you can walk around a few lap lines or silk threads on the inside of the ring. If you are too tight, you can apply soapy water on your fingers, so you can put it on or take off smoothly.
(1) Ring inch -inch comparison table. If you are for other brand numbers (many brand numbers are different), please consult customer service to determine the inch number/diameter (MM) perimeter (MM) corresponding port code (corresponding to Zhou Dafu and and and The Zhou Shengsheng ring index) 15mm 47 8 (some diamond ring, in the "small ring" classification) 15.5mm 48.7 9 (partial diamond ring, in the "small ring" category) 16mm 50.3 No. 11 16.5mm 52/13 17mm 53.4 14/15 17.5mm 55 16 18mm 56.5 17/18 19mm 59.6 20/21 20mm 62.8 23 21mm 66 24/25 22mm 69 26 n women's ring size is 16-19mm size is 16-19mm Inner diameter (16/16.5/17mm is the most common size among girls, 17.5mm medium size is large, 18/19mm is large) men's ring size is 17-22mm diameter (18/19mm among boys boys The most common size, 20/21mm is large)
1. A size method (very recommended, accurate and simple) In the inner diameter of the appropriate ring to the ring (note that the inner diameter. It does not include the ring of the ring)
2. Method of size method two (recommendation) Gold) Silver Jewelry Shop or Night Market Ring stalls to wear it, and asked the store to ask themselves to wear the size of the ring (ring diameter or circumstances). This method is guaranteed not wrong, so it is recommended to use it. (Generally within 0.5mm, it will be suitable, but it is best not to be too small) 3. Measurement Method 3 (Recommended)
If you are too large, you must try to tighten as much as possible. The measurement of the measured u003Cring size table> above the measured week long reference. Find the appropriate ring number. 4. Measurement method 5 In a piece of white paper and draw a diameter (close to your own size) 16mm, 16.5mm or 17mm, 17.5mm circle, hollow the circle, put your fingers into, Measure your appropriate size. It is not convenient to find the MM of the round regulations. You can draw the center point with a ruler, the circle point on both sides, and then rotate along the center point to find the multiple points of the circle (about the round shape).
The friendly reminder: The standard of the ring fingers is called the inch. Modern inch is represented by numbers. When buying the ring by the inch, it is advisable to be slightly tight after wearing a ring in summer. In winter, it is advisable to turn left and right after wearing it. When wearing a ring, if you feel too loose, you can walk around a few circles of red lines or silk threads in the ring wheel of the ring. If you feel too tight, you can apply a soap liquid on your fingers, so that you can put it off smoothly.
Tools prepare to measure the size of the ring: fine rope (no elasticity), straight ruler, pen, scissors
The specific methods are as follows:
1, two laps around the root of the finger, tighten the rope, the fingers are not uncomfortable It is appropriate.
2. Use a pen to marker at the same position of the two -round rope. The mark should not be too thick, so as not to affect the accuracy of the measurement.
3, straighten the rope, measure the length between the two points with a straight ruler, this length corresponds to the length of the ring.
The simple method of measurement of the ring size is as follows:
1, first, prepare a note to cut into a width of about one centimeter. When cutting the note, you must pay attention to the flatness of the edge, which can reduce the error.
2, and then take the cut note around the fingers you want to bring. As shown in the figure below, just coincide with the position of the starting note. Then use your own nails to press a fine mark with your own nails. Then use a pen to make a mark.
3, how many centimeters can be measured by the last ruler. After the measurement of the ring is completed, you can find your own appropriate surrounding according to the universalic meter.
The expansion information:
Ring size Measurement
1. When measuring the inch, make sure it can smoothly slide over the top of the finger joint; if you feel too loose after bringing the ring, you can wrap around the inner side of the ring. A few circles, red lines, or silk threads. If you are too tight, you can apply skin oil or soapy water on your fingers, so that you can put it on or take off smoothly.
2, buying a ring in winter, because the weather is cold, the fingers are thinner than the summer to the half to the number. If you want to get more accurate size, you can measure it at the end of this day, because the size of the finger is the largest at this time.
3, the size control table is for reference only. If the accuracy of the number cannot be guaranteed, it is recommended to go to the jewelry store to measure your head in order to avoid buying inappropriate rings.
You can measure the perimeter of your fingers, and then go to the size of the ring to find a suitable ring.
The specific measurement method is as follows:
1. A circle of the fingers of the fingers of the ring with a wide note, be careful not to be too loose or too tight. Make a mark at the junction of the note, so that it is convenient to measure the next step, as shown in the figure below:
3, then expand the note, how many centimeters are measured with a ruler. The perimeter:
4. After the measurement is measured, the size of the ring can be found to find the ring that suits you:
Step/Method
The width note surrounds the fingers wearing rings
This on the intersection of the paper strip. The data is the length of the need to buy the ring
based on the weekly check the ring the ring
Note
For your own measurement accurate, you can use wide paper at home. Strip the root of the fingers, loosely tightly and the roots of the fingers of the fingers, and then use the pen to marker the intersection of the wide note around the intersection, measure the length of the note with a ruler, and find the corresponding finger circle on the table. Numbers, and adjust your number appropriately according to the seasonal different seasons. Buy the ring in winter. Because the weather is cold, the fingers are thinner than the summer to the half to the half. It is appropriate to feel a little tight after being brought.
If with the ring if you feel too loose, you can walk around a few lap lines or silk threads on the inside of the ring. If you are too tight, you can apply soapy water on your fingers, so you can put it on or take off smoothly.
(1) Ring inch -inch comparison table. If you are for other brand numbers (many brand numbers are different), please consult customer service to determine the inch
number/diameter (MM) perimeter (MM) corresponding port code (corresponding to Zhou Dafu and and and The Zhou Shengsheng ring index)
15mm 47 8 (some diamond ring, in the "small ring" classification)
15.5mm 48.7 9 (partial diamond ring, in the "small ring" category)
16mm 50.3 No. 11
16.5mm 52/13
17mm 53.4 14/15
17.5mm 55 16
18mm 56.5 17/18
19mm 59.6 20/21
20mm 62.8 23
21mm 66 24/25
22mm 69 26
n women's ring size is 16-19mm size is 16-19mm Inner diameter (16/16.5/17mm is the most common size among girls, 17.5mm medium size is large, 18/19mm is large)
men's ring size is 17-22mm diameter (18/19mm among boys boys The most common size, 20/21mm is large)
1. A size method (very recommended, accurate and simple)
In the inner diameter of the appropriate ring to the ring (note that the inner diameter. It does not include the ring of the ring)
2. Method of size method two (recommendation)
Gold) Silver Jewelry Shop or Night Market Ring stalls to wear it, and asked the store to ask themselves to wear the size of the ring (ring diameter or circumstances). This method is guaranteed not wrong, so it is recommended to use it. (Generally within 0.5mm, it will be suitable, but it is best not to be too small)
3. Measurement Method 3 (Recommended)
If you are too large, you must try to tighten as much as possible.
The measurement of the measured u003Cring size table> above the measured week long reference. Find the appropriate ring number.
4. Measurement method 5
In a piece of white paper and draw a diameter (close to your own size) 16mm, 16.5mm or 17mm, 17.5mm circle, hollow the circle, put your fingers into, Measure your appropriate size.
It is not convenient to find the MM of the round regulations. You can draw the center point with a ruler, the circle point on both sides, and then rotate along the center point to find the multiple points of the circle (about the round shape).
The friendly reminder: The standard of the ring fingers is called the inch. Modern inch is represented by numbers. When buying the ring by the inch, it is advisable to be slightly tight after wearing a ring in summer. In winter, it is advisable to turn left and right after wearing it. When wearing a ring, if you feel too loose, you can walk around a few circles of red lines or silk threads in the ring wheel of the ring. If you feel too tight, you can apply a soap liquid on your fingers, so that you can put it off smoothly.