5 thoughts on “May I ask someone to buy a ring on behalf of others. How can I measure the size of the finger?”
Bridget
The size of the ring has two standards: diameter and perimeter. Just measure the diameter or perimeter of the finger. The general ring is worn on the index finger, middle finger, or ring finger. No. 22, of which 18-20 is more. The size of the ring is as shown in the figure below: The expansion information: The use of iron wire, cotton thread or note, take a note as an example, around the finger part of the finger that wants to wear a diamond ring to ensure the guarantee After the size of the circle is moderate, make a small mark, and then start the circle into a line. To measure the length, you can get the perimeter of the required ring. Then compare the ring size below. The cotton line measurement is easy to cause errors, and the measurement of wire and note is basically accurate. Reference materials: Baidu Encyclopedia-Ring
The standard of the ring fingers is called the inch. It is represented by the number of inchs. The inch is divided into American and Hong Kong style. The corresponding diameter and perimeter are different. At present, Hong Kong style is mostly used in China.
Measurement method: 1. First, use the silk thread to circle the fingers, then cut the wire thread and pull straight, measure the length of the wire thread with a ruler, and then compare the table (for example, The length of the wire line you measured is 53mm, then the size of your finger is 12). 2. Take the inner diameter of the inner diameter of the appropriate ring to determine the size below (note that the inner diameter. It does not include the thickness of the ring.) It is 13). 3. If it is convenient, you can directly measure the inch at the jewelry store. The measure of the ring size of the ring 1. The general ring is worn on the index finger, middle finger, or ring finger. The number of bodies of the department wearing the ring is No. 17-22, of which 18-20 is more; 2. Because the finger bones are slightly larger than the finger wearing a ring, do not ride too tightly; 3 When measuring the inch, make sure it can smoothly slide above the finger joint; if you feel too loose after bringing the ring, you can walk around a few laps, red lines or silk threads on the inside of the ring. Skin oil or soapy water, so that you can put it on or take off smoothly; 4. Buy the ring in winter. Because the weather is cold, your fingers are thinner than summer. It can be measured at the end of this day, because the size of the finger is the largest at this time.
The ring will have the size The smallest is No. 6, In you go to the store to try it, to see how many numbers you wear, n The size is uniform.
In the rough up, don't pick it up, you can bring your girlfriend back to the counter after sending it. Essence It can be observed and then please try the MM for sale. Essence Women's hands are easy to find a rough and thinner A answer supplements depends on you to buy rings for others. Still bring it yourself. Tell you a simple way. It is that all gold shops have "ring rods" that are specifically for your fingers. Generally, employees in Golden Stores will help you do n’t worry. If you buy it for others and you ca n’t go with her, you can compare it according to her previous ring or your fingers. Tied in his hands. I know it on the gold shop to the ring rod. In fact, I do n’t have so troublesome. I can give you a reference for you. In fact, you will find the size according to your situation as soon as you go to the gold shop.
Cut a piece of paper and surround the abdomen of wearing a ring. Don't be too loose or too tight, just feel comfortable! Then mark one end of the paper to the place where the fingers are just around, and then use the ruler to measure the length of the marked range to know the perimeter of the finger! Tell your buyer again and let him tell the jewelry shopkeeper! The waiter will give you the most suitable size!
Please use auxiliary (such as thread, silk, note) to wrap the length of the part of you to wear a ring. This size is the inner length of the ring that is suitable for you to wear, and you can find the corresponding number of ring nods below. Circle number --- diameter (millimeter) --- perimeter (millimeter) -diameter (mm)-perimeter (millimeter) 06 14.0 43.9 r 07 14.1 44.3 08 14.3 44.9 09 15.0 47.1 10 15.2 47.7
The size of the ring has two standards: diameter and perimeter. Just measure the diameter or perimeter of the finger.
The general ring is worn on the index finger, middle finger, or ring finger. No. 22, of which 18-20 is more.
The size of the ring is as shown in the figure below:
The expansion information:
The use of iron wire, cotton thread or note, take a note as an example, around the finger part of the finger that wants to wear a diamond ring to ensure the guarantee After the size of the circle is moderate, make a small mark, and then start the circle into a line. To measure the length, you can get the perimeter of the required ring. Then compare the ring size below.
The cotton line measurement is easy to cause errors, and the measurement of wire and note is basically accurate.
Reference materials: Baidu Encyclopedia-Ring
The standard of the ring fingers is called the inch. It is represented by the number of inchs. The inch is divided into American and Hong Kong style. The corresponding diameter and perimeter are different. At present, Hong Kong style is mostly used in China.
Measurement method:
1. First, use the silk thread to circle the fingers, then cut the wire thread and pull straight, measure the length of the wire thread with a ruler, and then compare the table (for example, The length of the wire line you measured is 53mm, then the size of your finger is 12).
2. Take the inner diameter of the inner diameter of the appropriate ring to determine the size below (note that the inner diameter. It does not include the thickness of the ring.) It is 13).
3. If it is convenient, you can directly measure the inch at the jewelry store.
The measure of the ring size of the ring
1. The general ring is worn on the index finger, middle finger, or ring finger. The number of bodies of the department wearing the ring is No. 17-22, of which 18-20 is more;
2. Because the finger bones are slightly larger than the finger wearing a ring, do not ride too tightly;
3 When measuring the inch, make sure it can smoothly slide above the finger joint; if you feel too loose after bringing the ring, you can walk around a few laps, red lines or silk threads on the inside of the ring. Skin oil or soapy water, so that you can put it on or take off smoothly;
4. Buy the ring in winter. Because the weather is cold, your fingers are thinner than summer. It can be measured at the end of this day, because the size of the finger is the largest at this time.
The ring will have the size
The smallest is No. 6,
In you go to the store to try it,
to see how many numbers you wear,
n The size is uniform.
In the rough up, don't pick it up, you can bring your girlfriend back to the counter after sending it. Essence
It can be observed and then please try the MM for sale. Essence Women's hands are easy to find a rough and thinner
A answer supplements depends on you to buy rings for others. Still bring it yourself. Tell you a simple way. It is that all gold shops have "ring rods" that are specifically for your fingers. Generally, employees in Golden Stores will help you do n’t worry. If you buy it for others and you ca n’t go with her, you can compare it according to her previous ring or your fingers. Tied in his hands. I know it on the gold shop to the ring rod. In fact, I do n’t have so troublesome. I can give you a reference for you. In fact, you will find the size according to your situation as soon as you go to the gold shop.
Cut a piece of paper and surround the abdomen of wearing a ring. Don't be too loose or too tight, just feel comfortable! Then mark one end of the paper to the place where the fingers are just around, and then use the ruler to measure the length of the marked range to know the perimeter of the finger! Tell your buyer again and let him tell the jewelry shopkeeper! The waiter will give you the most suitable size!
Please use auxiliary (such as thread, silk, note) to wrap the length of the part of you to wear a ring. This size is the inner length of the ring that is suitable for you to wear, and you can find the corresponding number of ring nods below.
Circle number --- diameter (millimeter) --- perimeter (millimeter)
-diameter (mm)-perimeter (millimeter)
06 14.0 43.9 r
07 14.1 44.3
08 14.3 44.9
09 15.0 47.1
10 15.2 47.7